86 lines
4.8 KiB
YAML
86 lines
4.8 KiB
YAML
/**:
|
|
ros__parameters:
|
|
# Topics
|
|
pointCloudTopic: "/sensing/lidar/top/pointcloud" # Point cloud data
|
|
imuTopic: "/sensing/imu/tamagawa/imu_raw" # IMU data
|
|
odomTopic: "odometry/imu" # IMU pre-preintegration odometry, same frequency as IMU
|
|
gpsTopic: "/sensing/gnss/ublox/nav_sat_fix" # GPS odometry topic from navsat, see module_navsat.launch file
|
|
|
|
# Frames
|
|
lidarFrame: "base_link"
|
|
baselinkFrame: "base_link"
|
|
odometryFrame: "odom"
|
|
mapFrame: "map"
|
|
|
|
# GPS Settings
|
|
useImuHeadingInitialization: true # if using GPS data, set to "true"
|
|
useGpsElevation: true # if GPS elevation is bad, set to "false"
|
|
gpsCovThreshold: 2.0 # m^2, threshold for using GPS data
|
|
poseCovThreshold: 25.0 # m^2, threshold for using GPS data
|
|
|
|
# Export settings
|
|
savePCD: false # https://github.com/TixiaoShan/LIO-SAM/issues/3
|
|
savePCDDirectory: "/Documents/map/" # in your home folder, starts and ends with "/". Warning: the code deletes "LOAM" folder then recreates it. See "mapOptimization" for implementation
|
|
|
|
# Sensor Settings
|
|
sensor: robosense # lidar sensor type, 'velodyne' or 'ouster' or 'livox' or 'robosense'
|
|
N_SCAN: 64 # number of lidar channel (i.e., Velodyne/Ouster: 16, 32, 64, 128, Livox Horizon: 6)
|
|
Horizon_SCAN: 1800 # lidar horizontal resolution (Velodyne:1800, Ouster:512,1024,2048, Livox Horizon: 4000)
|
|
downsampleRate: 2 # default: 1. Downsample your data if too many points(line). i.e., 16 = 64 / 4, 16 = 16 / 1
|
|
point_filter_num: 1 # default: 3. Downsample your data if too many points(point). e.g., 16: 1, 32: 5, 64: 8
|
|
lidarMinRange: 1.0 # default: 1.0, minimum lidar range to be used
|
|
lidarMaxRange: 1000.0 # default: 1000.0, maximum lidar range to be used
|
|
|
|
# IMU Settings
|
|
imuType: 0 # 0: 6-axis 1: 9-axis
|
|
imuRate: 100.0
|
|
imuAccNoise: 0.0001
|
|
imuGyrNoise: 0.0001
|
|
imuAccBiasN: 0.00001
|
|
imuGyrBiasN: 0.00001
|
|
imuGravity: 9.80511
|
|
imuRPYWeight: 0.01
|
|
|
|
# Extrinsics: T_lb (lidar -> imu)
|
|
extrinsicTrans: [0.019973, 0.01783, -0.895085]
|
|
extrinsicRot: [1.0, 0.0, 0.0,
|
|
0.0, 1.0, 0.0,
|
|
0.0, 0.0, 1.0]
|
|
|
|
# This parameter is set only when the 9-axis IMU is used, but it must be a high-precision IMU. e.g. MTI-680
|
|
extrinsicRPY: [0.0, 0.0, 0.0,
|
|
0.0, 1.0, 0.0,
|
|
0.0, 0.0, 1.0]
|
|
|
|
# voxel filter paprams
|
|
mappingSurfLeafSize: 0.3 # default: 0.4 - outdoor, 0.2 - indoor
|
|
|
|
# robot motion constraint (in case you are using a 2D robot)
|
|
z_tollerance: 1000.0 # meters
|
|
rotation_tollerance: 1000.0 # radians
|
|
|
|
# CPU Params
|
|
numberOfCores: 4 # number of cores for mapping optimization
|
|
mappingProcessInterval: 0.0 # seconds, regulate mapping frequency
|
|
|
|
# Surrounding map
|
|
surroundingkeyframeAddingDistThreshold: 1.0 # meters, regulate keyframe adding threshold
|
|
surroundingkeyframeAddingAngleThreshold: 0.2 # radians, regulate keyframe adding threshold
|
|
surroundingKeyframeDensity: 2.0 # meters, downsample surrounding keyframe poses
|
|
surroundingKeyframeSearchRadius: 50.0 # meters, within n meters scan-to-map optimization (when loop closure disabled)
|
|
surroundingKeyframeMapLeafSize: 0.5 # downsample local map point cloud
|
|
|
|
# Loop closure
|
|
loopClosureEnableFlag: true
|
|
loopClosureFrequency: 1.0 # Hz, regulate loop closure constraint add frequency
|
|
surroundingKeyframeSize: 50 # submap size (when loop closure enabled)
|
|
historyKeyframeSearchRadius: 15.0 # meters, key frame that is within n meters from current pose will be considerd for loop closure
|
|
historyKeyframeSearchTimeDiff: 30.0 # seconds, key frame that is n seconds older will be considered for loop closure
|
|
historyKeyframeSearchNum: 25 # number of hostory key frames will be fused into a submap for loop closure
|
|
loopClosureICPSurfLeafSize: 0.5 # downsample icp point cloud
|
|
historyKeyframeFitnessScore: 0.3 # icp threshold, the smaller the better alignment
|
|
|
|
# Visualization
|
|
globalMapVisualizationSearchRadius: 1000.0 # meters, global map visualization radius
|
|
globalMapVisualizationPoseDensity: 1.0 # meters, global map visualization keyframe density
|
|
globalMapVisualizationLeafSize: 0.5 # meters, global map visualization cloud density |