# Path Smoothing Comparison Implementation Plan

> **For agentic workers:** REQUIRED SUB-SKILL: Use superpowers:subagent-driven-development (recommended) or superpowers:executing-plans to implement this plan task-by-task. Steps use checkbox (`- [ ]`) syntax for tracking.

**Goal:** Build a validated coarse-path smoothing module that compares cubic B-spline, local cubic Bézier, and piecewise quintic paths, then exports reproducible IEEE-style Chinese reports for existing and fast fixture scenarios.

**Architecture:** Add `PathSmoothing` beside `CoarsePath`; keep contracts, shared geometry processing, algorithms, validation, comparison, and rendering isolated. Every algorithm consumes the same preprocessed direction segments, every candidate passes the same analyzer and full-footprint validator, and only accepted results reach the formal facade. Reporting consumes immutable comparison data and cannot affect planning status.

**Tech Stack:** C# 10, .NET Standard 2.0, existing `PlanningGridMap`/`FootprintCollisionChecker`, PowerShell reflection tests, Newtonsoft.Json 13.0.4, StbImageWriteSharp 1.16.7, System.Drawing.Common 10.0.10 on Windows.

## Global Constraints

- Core units are m, rad, and 1/m; no mm or degree conversion inside smoothing algorithms.
- Preserve start, goal, direction-segment order, gear-switch count, and gear-switch poses exactly.
- Never differentiate, resample, or fit across a gear-switch duplicate pair.
- Default output spacing is `0.05 m`; default swept-collision step is `0.025 m`.
- A formal result publishes a path only for `Success` or explicitly verified `FallbackToCoarsePath`.
- Rejected candidates may appear only in comparison diagnostics, never in `PathSmoothingResult.Path`.
- No speed, acceleration, time, SQP, Frenet, chassis, sensor, localization, or UI dependencies.
- Figure size is `7.16 × 5.2 in`; PNG size is `2148 × 1560 px` with 300 dpi metadata.
- Chinese text uses `SimSun`; English, numbers, Greek, and mathematics use `Times New Roman`.
- Fixed method colors are raw `#4D4D4D`, B-spline `#0072B2`, Bézier `#D55E00`, quintic `#009E73`, and curvature limits `#CC79A7`.
- `System.Drawing.Common` is a Windows-only report-rendering dependency; smoothing, validation, comparison, SVG, and CSV remain independent of its runtime availability.
- Follow TDD for every task: failing verification first, minimal implementation second, full relevant verification before commit.

---

### Task 1: Immutable smoothing contracts

**Files:**
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/SmoothingMethod.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/PathSmoothingStatus.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/SmoothedPathPointSource.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/SmoothedPathPoint.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/SmoothedPathSegment.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/CubicBSplineOptions.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/LocalCubicBezierOptions.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/PiecewiseQuinticOptions.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/PathSmoothingConfiguration.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/PathSmoothingRequest.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/PathQualityMetrics.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/PathSmoothingDiagnostics.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts/PathSmoothingResult.cs`
- Test: `ClumsyPilot/tests/verify_path_smoothing_contracts.ps1`

**Interfaces:**
- Consumes: `CoarsePathPoint`, `PathSegment`, `PlanningGridMap`, `VehicleParameters`.
- Produces: `PathSmoothingRequest`; `PathSmoothingResult.Success(...)`; `PathSmoothingResult.Fallback(...)`; `PathSmoothingResult.Failure(...)`; all public enums and value objects used below.

- [ ] **Step 1: Write the failing contract verification**

Create a reflection script that loads `ClumsyPilot.dll`, resolves every type listed above, and verifies these exact defaults and invariants:

```powershell
$configuration = [Activator]::CreateInstance($configurationType)
Assert-Near 0.05 $configuration.OutputSpacingMeters 'Default output spacing must be 0.05 m.'
Assert-Near 0.025 $configuration.MaximumCollisionCheckStepMeters 'Default collision step must be 0.025 m.'
Assert-Equal 4 $configuration.RetryStrengthScales.Count 'Retry schedule must contain four entries.'
Assert-Near 1.0 $configuration.RetryStrengthScales[0] 'First retry scale must be 1.0.'
Assert-Near 0.25 $configuration.RetryStrengthScales[3] 'Last retry scale must be 0.25.'

$failed = $resultType.GetMethod('Failure').Invoke(
    $null,
    @([Enum]::Parse($statusType, 'InvalidInput'),
      [Activator]::CreateInstance($diagnosticsType)))
Assert-Equal 0 $failed.Path.Count 'Failure must publish no path.'
Assert-Equal 0 $failed.Segments.Count 'Failure must publish no segments.'
```

Also construct a `SmoothedPathPoint` and assert all units/properties, construct two `SmoothedPathSegment` instances, and prove returned collections cannot be mutated.

- [ ] **Step 2: Run the verification and confirm RED**

Run:

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_contracts.ps1
```

Expected: build succeeds on existing code; script fails because `MultiWheelC.TrajectoryPlanning.PathSmoothing.PathSmoothingConfiguration` is missing.

- [ ] **Step 3: Implement enums, immutable values, and result factories**

Use namespace `MultiWheelC.TrajectoryPlanning.PathSmoothing`. Implement these exact public shapes:

```csharp
public enum SmoothingMethod { CubicBSpline, LocalCubicBezier, PiecewiseQuintic }
public enum PathSmoothingStatus { Success, FallbackToCoarsePath, InvalidInput, Infeasible, Failed, Cancelled }
public enum SmoothedPathPointSource { Anchor, Interpolated, GearSwitch, CoarsePathFallback }

public sealed class PathSmoothingConfiguration
{
    public PathSmoothingConfiguration()
    {
        OutputSpacingMeters = 0.05d;
        MaximumCollisionCheckStepMeters = 0.025d;
        MinimumClearanceReserveMeters = 0.02d;
        SmoothingStrength = 1d;
        AllowFallbackToCoarsePath = true;
        RetryStrengthScales = new ReadOnlyCollection<double>(
            new List<double> { 1d, 0.75d, 0.50d, 0.25d });
    }
    public SmoothingMethod Method { get; set; }
    public double OutputSpacingMeters { get; set; }
    public double MaximumCollisionCheckStepMeters { get; set; }
    public double MinimumClearanceReserveMeters { get; set; }
    public double SmoothingStrength { get; set; }
    public bool AllowFallbackToCoarsePath { get; set; }
    public IReadOnlyList<double> RetryStrengthScales { get; }
    public CubicBSplineOptions CubicBSpline { get; } = new CubicBSplineOptions();
    public LocalCubicBezierOptions LocalCubicBezier { get; } = new LocalCubicBezierOptions();
    public PiecewiseQuinticOptions PiecewiseQuintic { get; } = new PiecewiseQuinticOptions();
}
```

Use these exact option defaults:

```csharp
public sealed class CubicBSplineOptions
{
    public double EndpointTangentScale { get; set; } = 1d / 3d;
}
public sealed class LocalCubicBezierOptions
{
    public double CornerHeadingThresholdRadians { get; set; } = Math.PI / 18d;
    public double MaximumWindowLengthMeters { get; set; } = 0.60d;
    public double HandleLengthRatio { get; set; } = 1d / 3d;
}
public sealed class PiecewiseQuinticOptions
{
    public double KnotSpacingMeters { get; set; } = 0.50d;
    public double MinimumKnotSpacingMeters { get; set; } = 0.10d;
}
```

Define the request constructor exactly as:

```csharp
public PathSmoothingRequest(
    IReadOnlyList<CoarsePathPoint> coarsePath,
    IReadOnlyList<PathSegment> segments,
    PlanningGridMap map,
    VehicleParameters vehicle,
    PathSmoothingConfiguration configuration)
```

Define parameterless immutable-empty defaults for `PathQualityMetrics` and `PathSmoothingDiagnostics`, plus overloads that accept all measured values. The three result factories are:

```csharp
public static PathSmoothingResult Success(
    SmoothingMethod method, IReadOnlyList<SmoothedPathPoint> path,
    IReadOnlyList<SmoothedPathSegment> segments, PathSmoothingDiagnostics diagnostics);
public static PathSmoothingResult Fallback(
    SmoothingMethod attemptedMethod, IReadOnlyList<SmoothedPathPoint> path,
    IReadOnlyList<SmoothedPathSegment> segments, PathSmoothingDiagnostics diagnostics);
public static PathSmoothingResult Failure(
    PathSmoothingStatus status, PathSmoothingDiagnostics diagnostics);
```

`PathSmoothingResult` must copy all input lists into `ReadOnlyCollection<T>`. Reject `Success`/`Fallback` factories with empty paths or segments; reject `Failure` with a success-like status.

- [ ] **Step 4: Run contract verification and existing integration verification**

Run:

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_contracts.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_coarse_path_integration.ps1
```

Expected: both scripts end with their passed messages.

- [ ] **Step 5: Commit**

```powershell
git add -- ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Contracts ClumsyPilot/tests/verify_path_smoothing_contracts.ps1
git commit -m "feat: define path smoothing contracts"
```

### Task 2: Input preparation, direction splitting, resampling, and geometry analysis

**Files:**
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Processing/PreparedPath.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Processing/PreparedDirectionSegment.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Processing/SmoothingPoint2D.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Processing/PathGeometryAnalysis.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Processing/PathSmoothingPreprocessor.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Processing/ArcLengthResampler.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Processing/PathGeometryAnalyzer.cs`
- Test: `ClumsyPilot/tests/verify_path_smoothing_geometry.ps1`

**Interfaces:**
- Consumes: `PathSmoothingRequest`.
- Produces: `PathSmoothingPreprocessor.TryPrepare(request, out PreparedPath, out string)` and `PathGeometryAnalyzer.TryAnalyze(candidateSegments, spacing, out PathGeometryAnalysis analysis, out string reason)`.

- [ ] **Step 1: Write analytic failing tests**

Build reflection helpers that create:

```text
forward straight: (0,0,0) → (1,0,0), expected κ = 0
forward quarter circle: R=2, expected vehicle κ = +0.5
reverse quarter circle: R=2, expected vehicle κ = -0.5
gear switch: duplicated pose and arc length with opposite directions
```

Assert `0.05 m` spacing, exact final point, continuous `UnwrappedHeading`, correct curvature signs, and no derivative across the gear-switch pair.

- [ ] **Step 2: Run and confirm RED**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_geometry.ps1
```

Expected: fails because `PathGeometryAnalyzer` is missing.

- [ ] **Step 3: Implement deterministic preparation and resampling**

Implement segment-local linear arc interpolation:

```csharp
double ratio = (targetArc - left.ArcLength) / (right.ArcLength - left.ArcLength);
double x = left.X + ratio * (right.X - left.X);
double y = left.Y + ratio * (right.Y - left.Y);
double heading = left.UnwrappedHeading +
    ratio * (right.UnwrappedHeading - left.UnwrappedHeading);
```

Always append the exact segment end. Preserve separate gear-switch endpoints. Reject non-finite values, non-monotonic arc length, illegal duplicates, and segment coverage gaps.

- [ ] **Step 4: Implement shared geometry formulas**

For each direction segment, recompute arc length from Euclidean position increments, unwrap heading from travel tangents, and use stable one-sided/central differences:

```csharp
double geometricCurvature = deltaHeading / deltaArc;
double directionSign = direction == TravelDirection.Forward ? 1d : -1d;
double vehicleCurvature = directionSign * geometricCurvature;
double totalVariationIncrement = Math.Abs(currentCurvature - previousCurvature);
double variationEnergyIncrement =
    Math.Pow((currentCurvature - previousCurvature) / deltaArc, 2d) * deltaArc;
```

At segment boundaries use only samples from that segment. Never include the gear-switch duplicate distance in a denominator.

- [ ] **Step 5: Run geometry, contract, and utility checks**

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_geometry.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_contracts.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_planning_utils.ps1
```

Expected: all pass; circle curvature error stays within the tolerance encoded in the test.

- [ ] **Step 6: Commit**

```powershell
git add -- ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Processing ClumsyPilot/tests/verify_path_smoothing_geometry.ps1
git commit -m "feat: add smoothing path geometry processing"
```

### Task 3: Full-footprint smoothing validator

**Files:**
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Validation/SmoothedPathValidator.cs`
- Test: `ClumsyPilot/tests/verify_path_smoothing_validation.ps1`

**Interfaces:**
- Consumes: analyzed `SmoothedPathPoint`/`SmoothedPathSegment`, original prepared endpoints, `PlanningGridMap`, `VehicleParameters`, collision step.
- Produces: `TryValidate(..., out IReadOnlyList<SmoothedPathPoint> pathWithClearance, out double minimumClearance, out string reason)`.

- [ ] **Step 1: Write failing safety cases**

Create an empty map, an occupied rectangle map, and paths that are: valid; point-colliding; swept-motion-colliding; outside bounds; over maximum curvature; changed at a gear switch; and overclaiming clearance.

```powershell
Assert-False $collisionAccepted 'A smoothing candidate that cuts through an obstacle must be rejected.'
Assert-False $curvatureAccepted 'A smoothing candidate above vehicle maximum curvature must be rejected.'
Assert-False $switchAccepted 'A moved gear-switch pose must be rejected.'
Assert-True $validAccepted 'A valid straight candidate must pass.'
```

- [ ] **Step 2: Run and confirm RED**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_validation.ps1
```

Expected: missing `SmoothedPathValidator`.

- [ ] **Step 3: Implement validator using existing collision semantics**

For every point call `FootprintCollisionChecker.IsPoseCollisionFree`; for every non-duplicate adjacent pair call `IsSweptMotionCollisionFree`. Enforce:

```csharp
if (Math.Abs(point.VehicleCurvature) > maximumCurvature + 1e-6d)
    return Fail("平滑路径车辆曲率超过车辆上限。");
if (!SamePose(candidateStart, originalStart) || !SamePose(candidateEnd, originalEnd))
    return Fail("平滑路径改变了方向段端点。");
```

Replace candidate clearance with the conservative checked value; never retain a larger claimed value.

- [ ] **Step 4: Run validator and existing collision checks**

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_validation.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_coarse_path_collision.ps1
```

Expected: both pass.

- [ ] **Step 5: Commit**

```powershell
git add -- ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Validation ClumsyPilot/tests/verify_path_smoothing_validation.ps1
git commit -m "feat: validate smoothed vehicle paths"
```

### Task 4: Algorithm contract and finite retry runner

**Files:**
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Algorithms/IPathSmoother.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Algorithms/SmoothingCandidate.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Algorithms/SmoothingAlgorithmInput.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Algorithms/SmoothingAlgorithmRunner.cs`
- Test: `ClumsyPilot/tests/verify_path_smoothing_runner.ps1`

**Interfaces:**
- Consumes: `PreparedPath`, method-specific `IPathSmoother`, analyzer, validator, retry scales.
- Produces: one accepted candidate or stable `Infeasible`/`Failed` diagnostics with attempted strengths and optional rejected comparison geometry.

Use this exact internal algorithm interface:

```csharp
internal interface IPathSmoother
{
    SmoothingMethod Method { get; }
    SmoothingCandidate Smooth(
        SmoothingAlgorithmInput input,
        double effectiveStrength,
        CancellationToken cancellationToken);
}
```

- [ ] **Step 1: Write failing fake-smoother tests**

Use reflection plus internal test doubles exposed from a nested test helper to prove:

```text
strengths attempted exactly: 1.00, 0.75, 0.50, 0.25
stop immediately after first accepted candidate
do not retry numerical invalid input
cancel before the next attempt
retain rejected candidate only in comparison diagnostics
```

- [ ] **Step 2: Run and confirm RED**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_runner.ps1
```

Expected: missing `SmoothingAlgorithmRunner`.

- [ ] **Step 3: Implement the runner**

Use this control flow:

```csharp
foreach (double scale in configuration.RetryStrengthScales)
{
    cancellationToken.ThrowIfCancellationRequested();
    SmoothingCandidate candidate = smoother.Smooth(input, configuration.SmoothingStrength * scale);
    if (!candidate.Succeeded) return AlgorithmRunResult.Failed(candidate.Reason);
    if (!_analyzer.TryAnalyze(candidate.Segments, configuration.OutputSpacingMeters, out PathGeometryAnalysis analyzed, out var reason))
        return AlgorithmRunResult.Failed(reason);
    if (_validator.TryValidate(analyzed.Path, analyzed.Segments, input, out var safePath, out var clearance, out reason))
        return AlgorithmRunResult.Success(safePath, analyzed.Segments, metrics, scale);
    rejected = candidate;
    failures.Add(reason);
}
return AlgorithmRunResult.Infeasible(rejected, failures);
```

Convert `OperationCanceledException` to `Cancelled` at the facade boundary, not inside numerical algorithms.

- [ ] **Step 4: Run runner, geometry, and validator tests**

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_runner.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_geometry.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_validation.ps1
```

Expected: all pass.

- [ ] **Step 5: Commit**

```powershell
git add -- ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Algorithms ClumsyPilot/tests/verify_path_smoothing_runner.ps1
git commit -m "feat: add smoothing algorithm retry runner"
```

### Task 5: Clamped cubic B-spline smoother

**Files:**
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Algorithms/CubicBSplineSmoother.cs`
- Test: `ClumsyPilot/tests/verify_path_smoothing_bspline.ps1`

**Interfaces:**
- Implements: `IPathSmoother.Method == SmoothingMethod.CubicBSpline`.
- Produces: one geometry-only candidate per input direction segment.

- [ ] **Step 1: Write failing deterministic shape tests**

Verify a straight segment remains collinear, a five-point corner becomes tangent-continuous, endpoints and travel tangents are exact, and every displacement stays within its supplied movement radius.

- [ ] **Step 2: Run and confirm RED**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_bspline.ps1
```

Expected: missing `CubicBSplineSmoother`.

- [ ] **Step 3: Implement clamped basis evaluation and constrained control points**

Use degree 3, endpoint knot multiplicity 4, and Cox–de Boor basis evaluation. Fix the first/last control points to endpoints; place adjacent control points on endpoint travel tangents. Blend remaining control points toward local three-point averages:

```csharp
SmoothingPoint2D target = (previous + current + next) / 3d;
SmoothingPoint2D proposed = current + strength * (target - current);
SmoothingPoint2D bounded = ClampDisplacement(current, proposed, allowedRadius);
```

Return the original straight samples when all perpendicular deviations are below `1e-9`.

- [ ] **Step 4: Run algorithm and shared safety tests**

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_bspline.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_runner.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_validation.ps1
```

Expected: all pass.

- [ ] **Step 5: Commit**

```powershell
git add -- ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Algorithms/CubicBSplineSmoother.cs ClumsyPilot/tests/verify_path_smoothing_bspline.ps1
git commit -m "feat: add cubic b-spline path smoother"
```

### Task 6: Local cubic Bézier smoother

**Files:**
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Algorithms/LocalCubicBezierSmoother.cs`
- Test: `ClumsyPilot/tests/verify_path_smoothing_bezier.ps1`

**Interfaces:**
- Implements: `IPathSmoother.Method == SmoothingMethod.LocalCubicBezier`.
- Consumes: heading-change threshold, maximum local window, handle-length ratio.

- [ ] **Step 1: Write failing local-behavior tests**

Assert no window is created for a straight line; one corner creates one replacement; overlapping windows merge; outside-window samples remain bitwise equal; endpoints and switch points remain fixed.

- [ ] **Step 2: Run and confirm RED**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_bezier.ps1
```

Expected: missing `LocalCubicBezierSmoother`.

- [ ] **Step 3: Implement window detection and Bézier evaluation**

Detect corners from absolute change in travel tangent. Merge touching windows. For each window:

```csharp
SmoothingPoint2D p1 = p0 + entryTangent * handleLength;
SmoothingPoint2D p2 = p3 - exitTangent * handleLength;
SmoothingPoint2D value =
    Math.Pow(1d - t, 3d) * p0 +
    3d * Math.Pow(1d - t, 2d) * t * p1 +
    3d * (1d - t) * t * t * p2 +
    t * t * t * p3;
```

Clamp each evaluated displacement to the interpolated movement radius and retain original samples outside merged windows.

- [ ] **Step 4: Run Bézier and regression checks**

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_bezier.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_runner.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_coarse_path_integration.ps1
```

Expected: all pass.

- [ ] **Step 5: Commit**

```powershell
git add -- ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Algorithms/LocalCubicBezierSmoother.cs ClumsyPilot/tests/verify_path_smoothing_bezier.ps1
git commit -m "feat: add local cubic bezier smoother"
```

### Task 7: Piecewise quintic Hermite smoother

**Files:**
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Algorithms/PiecewiseQuinticSmoother.cs`
- Test: `ClumsyPilot/tests/verify_path_smoothing_quintic.ps1`

**Interfaces:**
- Implements: `IPathSmoother.Method == SmoothingMethod.PiecewiseQuintic`.
- Produces: C2-connected local polynomial segments without crossing direction boundaries.

- [ ] **Step 1: Write failing continuity and degeneracy tests**

At every shared knot evaluate left/right position, first derivative, and second derivative; assert equality within `1e-6`. Verify exact endpoint pose, bounded movement, and stable failure for a segment shorter than the configured minimum knot spacing.

- [ ] **Step 2: Run and confirm RED**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_quintic.ps1
```

Expected: missing `PiecewiseQuinticSmoother`.

- [ ] **Step 3: Implement normalized quintic Hermite basis**

For each knot interval use normalized `t ∈ [0,1]` and solve the six coefficients independently for X and Y from:

```text
p(0)=p0, p(1)=p1
p'(0)=v0, p'(1)=v1
p''(0)=a0, p''(1)=a1
```

Derive endpoint velocities from travel tangents times interval length. Blend shared accelerations once per knot and reuse the same value on both adjacent intervals. Reject singular or non-finite coefficients before sampling.

- [ ] **Step 4: Run quintic, geometry, and validator checks**

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_quintic.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_geometry.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_validation.ps1
```

Expected: all pass.

- [ ] **Step 5: Commit**

```powershell
git add -- ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Algorithms/PiecewiseQuinticSmoother.cs ClumsyPilot/tests/verify_path_smoothing_quintic.ps1
git commit -m "feat: add piecewise quintic path smoother"
```

### Task 8: Formal smoothing facade and explicit coarse-path fallback

**Files:**
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Facade/PathSmoothingService.cs`
- Test: `ClumsyPilot/tests/verify_path_smoothing_service.ps1`

**Interfaces:**
- Produces: `PathSmoothingResult Smooth(PathSmoothingRequest, CancellationToken)`.
- Consumes: preprocessor, method registry, retry runner, analyzer, validator.

- [ ] **Step 1: Write failing facade tests**

Cover valid straight success, invalid input, cancellation, infeasible-without-fallback, and infeasible-with-verified-fallback. Assert fallback points use `CoarsePathFallback` and status never equals `Success`.

- [ ] **Step 2: Run and confirm RED**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_service.ps1
```

Expected: missing `PathSmoothingService`.

- [ ] **Step 3: Implement orchestration**

Use a stable method registry:

```csharp
private IPathSmoother Resolve(SmoothingMethod method) =>
    method switch
    {
        SmoothingMethod.CubicBSpline => _bSpline,
        SmoothingMethod.LocalCubicBezier => _bezier,
        SmoothingMethod.PiecewiseQuintic => _quintic,
        _ => throw new ArgumentOutOfRangeException(nameof(method)),
    };
```

Validate the coarse path before smoothing. On allowed fallback, convert the revalidated coarse points to `SmoothedPathPoint` with `CoarsePathFallback`, re-run shared geometry analysis, and return `Fallback`, preserving the failed method diagnostics.

- [ ] **Step 4: Run all core smoothing verifications**

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_contracts.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_geometry.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_validation.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_service.ps1
```

Expected: all pass.

- [ ] **Step 5: Commit**

```powershell
git add -- ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Facade ClumsyPilot/tests/verify_path_smoothing_service.ps1
git commit -m "feat: expose validated path smoothing service"
```

### Task 9: Comparison metrics, isolation, and deterministic ranking

**Files:**
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Comparison/PathSmoothingComparisonRequest.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Comparison/PathSmoothingComparisonEntry.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Comparison/PathSmoothingComparisonResult.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Comparison/SmoothingMethodRanker.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Facade/PathSmoothingComparisonService.cs`
- Test: `ClumsyPilot/tests/verify_path_smoothing_comparison.ps1`

**Interfaces:**
- Produces: `Compare(PathSmoothingComparisonRequest, CancellationToken)`.
- Ranking order: feasible count; median variation energy; worst peak utilization; worst clearance loss; median length increase; median elapsed.

- [ ] **Step 1: Write failing comparison and ranking tests**

Create synthetic entries whose order changes at each tie-break level. Verify one method failure does not stop the remaining methods, cancellation does, and no feasible method produces a null recommendation.

Also assert the result always contains one separately analyzed raw-path baseline plus exactly one entry for each requested method; the raw baseline is never treated as a candidate method in ranking.

- [ ] **Step 2: Run and confirm RED**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_comparison.ps1
```

Expected: missing comparison service/ranker.

- [ ] **Step 3: Implement metric normalization and lexicographic comparison**

Use stable median:

```csharp
double Median(IReadOnlyList<double> values)
{
    double[] sorted = values.OrderBy(value => value).ToArray();
    int middle = sorted.Length / 2;
    return sorted.Length % 2 == 1
        ? sorted[middle]
        : (sorted[middle - 1] + sorted[middle]) / 2d;
}
```

Use absolute deltas when a raw denominator has magnitude below `1e-12`. The comparison service must force `AllowFallbackToCoarsePath = false` so fallback cannot masquerade as method success.

- [ ] **Step 4: Run comparison and service tests**

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_comparison.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_service.ps1
```

Expected: all pass.

- [ ] **Step 5: Commit**

```powershell
git add -- ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Comparison ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Facade/PathSmoothingComparisonService.cs ClumsyPilot/tests/verify_path_smoothing_comparison.ps1
git commit -m "feat: compare and rank smoothing methods"
```

### Task 10: Versioned fast fixtures and existing end-to-end scenarios

**Files:**
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Test/SmoothingScenarioFixture.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Test/SmoothingScenarioFixtureLoader.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Test/SmoothingFixtureGenerator.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Test/SmoothingScenarioFactory.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Test/Fixtures/path-smoothing-fixtures.json`
- Create: `ClumsyPilot/tests/generate_path_smoothing_fixtures.ps1`
- Create: `ClumsyPilot/tests/verify_path_smoothing_fixtures.ps1`
- Create: `ClumsyPilot/tests/verify_path_smoothing_integration.ps1`

**Interfaces:**
- Produces: eight immutable fast fixtures and four end-to-end comparison requests.
- Consumes: existing `CoarsePathScenarioFactory.Create(scenario)` for end-to-end requests.

- [ ] **Step 1: Write failing fixture tests**

Assert the exact IDs:

```powershell
$expected = @(
  'straight', 'single-turn', 's-bend', 'large-heading-change',
  'rectangle-detour', 'multi-obstacle-detour',
  'narrow-corridor', 'forward-reverse-switch')
```

Verify unique IDs, version > 0, matching fingerprint, valid segment coverage, and that fixture-only loading has no reference to `HybridAStarPlanner`.

- [ ] **Step 2: Write failing end-to-end tests**

For `ExplicitEmpty`, `RectangleDetour`, `ManualAndTwoLeg`, and `ReverseGearSwitch`, call the existing planner then comparison service. Assert the raw path is unchanged and every successful smoothing entry preserves segment count and gear-switch count.

- [ ] **Step 3: Run and confirm RED**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_fixtures.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_integration.ps1
```

Expected: missing fixture loader/factory.

- [ ] **Step 4: Implement deterministic JSON fixtures**

Serialize with invariant numbers and explicit schema:

```json
{
  "schemaVersion": 1,
  "scenarios": [
    {
      "id": "straight",
      "fixtureVersion": 1,
      "configurationFingerprint": "sha256:<lowercase-hex>",
      "map": {
        "xMinMm": 0, "xMaxMm": 6000,
        "yMinMm": 0, "yMaxMm": 4000,
        "resolutionMm": 50,
        "obstacles": []
      },
      "vehicle": { "lengthMeters": 0.8, "widthMeters": 0.6, "safetyMarginMeters": 0.05, "maximumCurvaturePerMeter": 0.8333333333333334 },
      "path": [],
      "segments": []
    }
  ]
}
```

Populate all eight scenarios from explicitly verified successful coarse-path outputs by running:

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\generate_path_smoothing_fixtures.ps1 -OutputPath .\ClumsyPilot\ParkrobTrajplanner\PathSmoothing\Test\Fixtures\path-smoothing-fixtures.json
```

`SmoothingFixtureGenerator.Generate(string outputPath, bool overwrite)` must refuse an existing target when `overwrite` is false. The script maps `-Overwrite` to that argument; normal tests call only `LoadAndVerify` and never regenerate data. Each obstacle is serialized as a typed circle or axis-aligned rectangle DTO so the loader can rebuild the exact `PlanningGridMap` without Hybrid A*.

- [ ] **Step 5: Run fixture and integration checks**

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_fixtures.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_integration.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_coarse_path_integration.ps1
```

Expected: all pass. Record actual end-to-end elapsed values as diagnostics, not hardware-dependent pass thresholds.

- [ ] **Step 6: Commit**

```powershell
git add -- ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Test ClumsyPilot/tests/generate_path_smoothing_fixtures.ps1 ClumsyPilot/tests/verify_path_smoothing_fixtures.ps1 ClumsyPilot/tests/verify_path_smoothing_integration.ps1
git commit -m "test: add path smoothing scenarios and fixtures"
```

### Task 11: Shared figure model, IEEE SVG, and UTF-8 CSV

**Files:**
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Visualization/IeeeFigureStyle.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Visualization/SmoothingFigureModel.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Visualization/SmoothingFigureModelBuilder.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Visualization/SmoothingSvgRenderer.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Visualization/SmoothingCsvWriter.cs`
- Test: `ClumsyPilot/tests/verify_path_smoothing_svg_csv.ps1`

**Interfaces:**
- Consumes: immutable `PathSmoothingComparisonResult`, map, start/goal, scenario label.
- Produces: one immutable figure model, UTF-8 SVG, and UTF-8-BOM CSV.

- [ ] **Step 1: Write failing style and serialization tests**

Assert exact colors, line styles, panel labels, view box, equal XY scale, legend order, XML escaping, UTF-8 Chinese, BOM bytes `EF BB BF`, and invariant decimal points.

Include one rejected candidate in the model and assert its normal method-colored curve plus violation cross markers are present while its metrics row says `Infeasible`. Include one numerical failure and assert its legend/row remains but no fake path element is emitted.

- [ ] **Step 2: Run and confirm RED**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_svg_csv.ps1
```

Expected: missing `IeeeFigureStyle`.

- [ ] **Step 3: Implement one physical layout model**

Define all coordinates in typographic points (`72 pt/in`):

```csharp
public const double FigureWidthPoints = 7.16d * 72d;
public const double FigureHeightPoints = 5.20d * 72d;
public const string RawColor = "#4D4D4D";
public const string BSplineColor = "#0072B2";
public const string BezierColor = "#D55E00";
public const string QuinticColor = "#009E73";
public const string LimitColor = "#CC79A7";
```

Allocate 60% width to panel `(a)`, split the right side between `(b)` curvature and `(c)` metrics, and compute one world-to-panel transform with equal X/Y scale.

- [ ] **Step 4: Implement SVG and CSV**

SVG text must use explicit runs:

```xml
<text><tspan font-family="SimSun">车辆曲率 </tspan><tspan font-family="Times New Roman">κ (m⁻¹)</tspan></text>
```

CSV header order is fixed:

```text
ScenarioId,Method,Status,PathLengthMeters,MaximumAbsoluteVehicleCurvaturePerMeter,RootMeanSquareVehicleCurvaturePerMeter,TotalAbsoluteCurvatureVariationPerMeter,CurvatureVariationEnergy,MinimumBodyClearanceMeters,ElapsedMilliseconds,RetryCount,AcceptedStrength
```

- [ ] **Step 5: Run SVG/CSV and comparison checks**

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_svg_csv.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_comparison.ps1
```

Expected: all pass.

- [ ] **Step 6: Commit**

```powershell
git add -- ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Visualization ClumsyPilot/tests/verify_path_smoothing_svg_csv.ps1
git commit -m "feat: render ieee smoothing svg and metrics"
```

### Task 12: Windows font validation and 300 dpi PNG export

**Files:**
- Modify: `ClumsyPilot/ClumsyPilot.csproj`
- Modify: `ClumsyPilot/ParkrobTrajplanner/Map/Test/Visualization/ValidatedPngWriter.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Visualization/SmoothingFontResolver.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Visualization/SmoothingPngRenderer.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Visualization/SmoothingReportExportRequest.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Visualization/SmoothingReportExportResult.cs`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Visualization/SmoothingReportExporter.cs`
- Test: `ClumsyPilot/tests/verify_path_smoothing_png.ps1`

**Interfaces:**
- Produces: atomic `.svg`, `.png`, `.csv` export; report failures do not mutate comparison results.
- Runtime boundary: `SmoothingPngRenderer` is Windows-only; SVG/CSV remain usable without GDI+.

- [ ] **Step 1: Add the failing PNG/font verification**

The script must assert:

```text
PNG signature and CRC-valid chunks
IHDR width=2148 and height=1560
pHYs X=11811 and Y=11811 pixels/meter
SimSun and Times New Roman were resolved by exact family name
mixed sample "粗路径 κ(s) X (m) −π" produced non-empty glyph bounds
missing-font test returns FontUnavailable
atomic export leaves no .tmp file
```

- [ ] **Step 2: Run and confirm RED**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_png.ps1
```

Expected: missing renderer and exporter.

- [ ] **Step 3: Add the exact Windows rendering dependency**

Add:

```xml
<PackageReference Include="System.Drawing.Common" Version="10.0.10" />
```

Then run:

```powershell
dotnet restore .\ClumsyPilot\ClumsyPilot.csproj
```

Expected: restore exits 0. Do not add cross-platform fallback switches; Microsoft documents `System.Drawing.Common` as Windows-only.

- [ ] **Step 4: Implement exact font resolution and mixed-run baseline layout**

Use `InstalledFontCollection` to require `SimSun` and `Times New Roman`. Split text by Unicode category/CJK ranges, measure each run with typographic `StringFormat`, and align runs by font-family ascent:

```csharp
float baseline = top + maxAscentPixels;
float runTop = baseline - family.GetCellAscent(style) * emPixels /
    family.GetEmHeight(style);
```

Return `FontUnavailable` before creating output files if either exact family is absent.

- [ ] **Step 5: Render the shared model and write validated PNG**

Render at `2148 × 1560`, opaque white background, anti-aliased geometry, and no gradients/shadows. Convert bitmap pixels to RGBA and use the existing validated PNG path, extending it to insert a `pHYs` chunk with `11811` pixels/meter and correct CRC before `IDAT`.

Export all three files to temporary siblings, validate each, then rename into place. On failure, remove only those exact temporary siblings.

- [ ] **Step 6: Run PNG, map-image, and build checks**

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_png.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_planning_map_image.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_svg_csv.ps1
```

Expected: all pass; existing map PNG export remains valid.

- [ ] **Step 7: Commit**

```powershell
git add -- ClumsyPilot/ClumsyPilot.csproj ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Visualization ClumsyPilot/tests/verify_path_smoothing_png.ps1
git commit -m "feat: export ieee smoothing png reports"
```

### Task 13: Module documentation, report batch entry, and full verification

**Files:**
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/README.md`
- Create: `ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Test/PathSmoothingComparisonDemo.cs`
- Create: `ClumsyPilot/tests/run_path_smoothing_comparison.ps1`
- Create: `ClumsyPilot/tests/verify_path_smoothing_documentation.ps1`

**Interfaces:**
- Produces: documented formal call example and a developer-only batch command that writes reports under `ClumsyPilot/obj/path_smoothing_reports`.

- [ ] **Step 1: Write failing documentation and batch-entry verification**

Assert README contains exact sections for units, facade usage, status handling, fallback, fixture freshness, IEEE colors/fonts, Windows PNG limitation, SQP boundary, and output files. Assert the batch runner offers `-FixtureOnly` and never writes under source directories.

- [ ] **Step 2: Run and confirm RED**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_documentation.ps1
```

Expected: missing README and demo.

- [ ] **Step 3: Write README and batch demo**

Document this minimal formal flow:

```csharp
if (coarseResult.PlanningResult.Status != PlanningStatus.Success)
    return;
var smoothing = new PathSmoothingService().Smooth(
    new PathSmoothingRequest(
        coarseResult.PlanningResult.Path,
        coarseResult.PlanningResult.Segments,
        coarseResult.MapResult.Map,
        job.Vehicle,
        smoothingConfiguration),
    cancellationToken);
if (smoothing.Status == PathSmoothingStatus.Success ||
    smoothing.Status == PathSmoothingStatus.FallbackToCoarsePath)
    ConsumeSpatialReference(smoothing.Path, smoothing.Segments);
```

The batch script builds once, runs eight fixtures by default, optionally runs the four end-to-end cases, prints one-line metrics per method, and writes only beneath `ClumsyPilot/obj/path_smoothing_reports`.

- [ ] **Step 4: Run the complete verification suite**

```powershell
dotnet build .\ClumsyPilot\ClumsyPilot.csproj --no-restore
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_planning_utils.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_planning_map_adapter.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_planning_map_factory.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_planning_map_image.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_coarse_path_collision.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_coarse_path_search.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_coarse_path_integration.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_contracts.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_geometry.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_validation.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_runner.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_bspline.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_bezier.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_quintic.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_service.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_comparison.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_fixtures.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_integration.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_svg_csv.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_png.ps1
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\verify_path_smoothing_documentation.ps1
```

Expected: build exits 0 and every script prints its passed message with no terminating errors.

- [ ] **Step 5: Generate and inspect representative reports**

```powershell
powershell -ExecutionPolicy Bypass -File .\ClumsyPilot\tests\run_path_smoothing_comparison.ps1 -FixtureOnly
```

Inspect `straight`, `rectangle-detour`, and `forward-reverse-switch` PNG/SVG files. Confirm four-method legend order, equal path axes, readable 8–10 pt text, no Chinese mojibake, no clipping/overlap, curvature limits, and infeasible markers where applicable.

- [ ] **Step 6: Commit**

```powershell
git add -- ClumsyPilot/ParkrobTrajplanner/PathSmoothing/README.md ClumsyPilot/ParkrobTrajplanner/PathSmoothing/Test/PathSmoothingComparisonDemo.cs ClumsyPilot/tests/run_path_smoothing_comparison.ps1 ClumsyPilot/tests/verify_path_smoothing_documentation.ps1
git commit -m "docs: document path smoothing comparison workflow"
```